Repeater, boostere, bridges & transceiver - side 3

SFP (mini-GBIC) transceiver modul, SFP (mini-GBIC) / LC enkelttilstand, op til 80 km, 1550 nm

SFP (mini-GBIC) transceiver modul, 1000Base-LX, LC- singlemode, op til 20 km, 1310 nm

Fibermedieomformer, 10Base-T, 100Base-TX, 1000Base-T, 1000Base-X, RJ-45 / SFP (mini-GBIC)

Fibermedieomformer, 100Mb LAN, 10Base-T, 100Base-FX, 100Base-TX, RJ-45 / ST multimodus, op til 2 km, 1310 nm

Medieomsætter, 10Base-T, 100Base-TX, RJ-45 / BNC, ekstern (pakke med 2 ), for AXIS P1346, P1346-E, P5534, P5534-E

Cisco GLC-LH-SMD Compatible, SM/MM LC, 10km / 550m, SFP (mini-GBIC) transceiver modul (equivalent to: Cisco GLC-LH-SMD), Gigabit Ethernet, 1000Base-LX, 1000Base-LH, LC, op til 10 km, 1310 nm

Repeater, 1GbE, RJ-45 / RJ-45, op til 100 m

KVM / audio forlænger, 100Mb LAN, USB, op til 120 m

Medieomsætter, 1GbE, 1000Base-X, 100Base-X, SFP (mini-GBIC) / SFP (mini-GBIC), 850 nm / 1310 nm / 1550 nm

KVM / audio forlænger, HDMI, 1GbE, USB, over CAT 6, USB, op til 200 m

Medieomsætter, 10Base-T, 100Base-FX, 100Base-TX, RJ-45 / SC multimodus, ekstern, op til 2 km, 1310 nm

Fibermedieomformer, 1GbE, 10Base-T, 100Base-TX, 1000Base-T, 1000Base-X, RJ-45 / SFP (mini-GBIC)

Extender Set, KVM / audio forlænger, HDMI, 1GbE, USB, over CAT 6, USB, op til 70 m

Video/audio ekspander, USB-C, 10Mb LAN, over CAT 5e/6, op til 100 m

Video/audio ekspander, HDMI, 19 pin HDMI Type A / 19 pin HDMI Type A, op til 13 m

SFP (mini-GBIC) transceiver modul, GigE, over CAT 5e, 1000Base-T, RJ-45, op til 100 m

SFP (mini-GBIC) transceiver modul, SC/UPC enkelttilstand, op til 20 km, 1490 (TX) / 1310 (RX) nm

* Input Port and Specifications* Transmitter (TX):* 1xHDMI In Male Cable: Used for connecting HDMI signal source devices, compliant with* HDMI 1.4 protocol specification, supporting a maximum resolution of 1080P@60Hz, downstream.* Compatible, 720P@60Hz, etc., supports HDCP 1.4.* 1xUSB-C femaleboard: Used for connecting product power supply, supports maximum power supply* 5V±5% ≥1A。* Receiver (RX):* 1xUSB-C femaleboard: Used for connecting product power supply, supports a maximum power supply of 5V ±5% 。1A.* * Output Ports and Specifications* Receiver (RX):* 1xHDMI Out femaleboard: Used for connecting HDMI display devices, supports hot swapping, meets HDMI 1.4 specification requirements, outputs supporting a maximum resolution of 1080P@60Hz, and is backward compatible with 720P@60Hz.* 1xVGA Out femaleboard: Used for connecting VGA display devices, supports hot swapping, outputs up to 1080P@60Hz resolution, and is backward compatible with 720P@60Hz, making it compatible with HDMI out. 1x3.5mm headphone jack: supports PCM2.0 audio output. 5 Indicator Light Description: The RX end indicator light is always on when powered on, while the TX end indicator light is slow-flash when powered off and reconnected or paired. After a successful pairing, it often stays on.* * Power Requirements: Both the TX and RX ends require an external power adapter to function, with 5V ±5% 。* Product power consumption: TX end: no load ≈ 245 mA, full load ≈ 441 mA; RX end: no load ≈ 550 mA, full load ≈ 637 mA;* * Video formats: RGB (8/10/12) bit; YCbCr:4:4 (4:2:2 not supported) (8/10/12) bit; does not support 3D/HDR/CEC/ARC functions;* * Audio formats and sampling rates: HDMI or 3.5mm audio interfaces support up to PCM2.0; 24-bit at 48kHz.* * The screen delay is approximately 140 ms.* * Product wireless transmission distance and HDMI cable length* * The wireless maximum range is 50 meters (open and unobstructed). 1080P60Hz HDMI comes with built-in cable length input, with a maximum HDMI output of 20 meters and a maximum VGA output of 15 meters.* * Simultaneous display/EDID reading shows both HDMI out and VGA out at the RX end; the EDID name is fixed as: Transmitter;* * The transmission method uses 5GHz wireless transmission.* * Operating temperature: 0℃~40℃.* * Storage temperature: -20℃ to 60℃.* * Measured temperature: Room temperature at 34°C (with full-load operation), the maximum shell temperature is approximately 46°C.* * Driver Installation Driver-Free Usage* * Supported systems: Windows 11/10/8.1/8/7/XP; Linux; MAC OS;* * Other product accessories: 1x HDMI male-to-female cable, 2x USB A to C power supply cable 1.5 meters, 1x3.5mm male-to-female audio cable 1.5 meters.

Sender + 8 modtagere, video/audio/infrarød forlænger, HDMI, infrarød, over CAT 6/6a/7, 8 porte, op til 50 m

Trådløs video/audio udvider, 802.11a, 802.11b/g/n, Wi-Fi 5, 802.15.1, op til 30 m, med 5 års Barco SmartCare, med 2 x Barco ClickShare Buttons

Transmitter- og modtagerkit, video/audio/USB forlænger, HDMI

Local Video Output, Video/audio ekspander, HDMI, over CAT 5/6, op til 70 m

Video/audio/infrarød forlænger, HDMI, 4 porte, op til 40 m

DIGITUS Wireless HDMI extender set, 50 m, 1080p/60Hz overfører HDMI-video- og lydsignaler trådløst i Full HD til fleksible installationer i møde-, konference- og kongreslokaler eller derhjemme.

• Trådløs Full HD-overførsel op til 50 m (fri sigtelinje): Send HDMI-video- og lydsignaler uden at trække kabler på tværs af rummet.
• Punkt-til-punkt 1-til-1-sæt: Indeholder 1x sender (kilde) og 1x modtager (outputenhed) til en dedikeret forbindelse.
• Understøtter op til 1920 x 1080 ved 60 Hz: Leverer jævn Full HD-afspilning til præsentationer og medier.
• Plug & Play-drift med automatisk parring: Etablerer hurtigt en forbindelse via den mest fordelagtige WiFi-kanal for pålidelig ydeevne.
• Sikker trådløs forbindelse: AES 128-bit-kryptering med WPA2-protokol hjælper med at beskytte det overførte indhold.
• Fleksible strømforsyningsmuligheder: Strøm via micro USB eller via HDMI-forbindelsen på din enhed (0.5A kræves) med LED-statusindikator for nem overvågning.

En kompakt Wireless HDMI extender-løsning designet til hurtige, kortvarige opsætninger og rene AV-forbindelser med færre kabler.

Fibermedieomformer, GigE, 1000Base-SX, 1000Base-T, RJ-45 / SC multimodus, op til 550 m, 850 nm, for P/N: TL-MC1400