Varenummer: 3482216
myFirst Make 3D pen
3D-pen startsæt lader børn i alderen 3 til 12 bringe tegninger til live med 0.9 mm PCL-filament med lav varme, trådløs USB-opladning og et design, der er sikkert at røre ved.
myFirst Make 3D pen er bygget til unge skabere med brugervenlige kontroller og hurtig størkning til sjov, interaktiv 3D-kunst og læring. Varmen bliver inde i enheden, mens det ikke-klæbende filament er nemt at rengøre, så kreativiteten er uden besvær.
- Trådløs drift med indbygget batteri og USB-opladning
- Filament med lav varme størkner hurtigt
- Ikke-klæbende materiale for nemmere rengøring
- Sikkert ydre, der forbliver køligt at røre ved
- Børnevenligt, ufarligt PCL-filamentmateriale
Designet til at vække fantasien og hjælpe unge sind med trygt at udforske praktisk 3D-skabelse.
343,00 kr.
274,40 kr. ekskl. moms
Billigste fragt (privatkunde) 39,00 kr.
Fjernlager, 2-3 dages levering
Lagerstatus i vores Pick-up Points
-
Aarhus (0 stk.)
Ikke på lager -
København (0 stk.)
Ikke på lager
3D Art for Young Creators
Our 3D Pen starter kit lets kids aged 3 to 12 bring their drawings to life, exploring the magic of 3D creation.
Imagination Unleashed
Specially designed for young creators, this 3D Pen allows them to turn their ideas into three-dimensional masterpieces.
User-Friendly and Safe
With easy-to-use controls and a safe design, this 3D pen offers a creative outlet that's perfect for young minds, sparking their creativity and artistic skills.
Fun and Interactive
Watch as they craft and construct with ease, all while having a blast and learning in an interactive way.
Wireless Convenience
Features an inbuilt battery with USB charging, eliminating the need for wires, ensuring easy usage and movement.
Rapid Solidification
Utilizes low-heat filament for fast solidification, with non-adhesive material that is easy to clean off.
Safe to Touch
The device's heat doesn't transfer to the exterior, ensuring the child's safety. The filament is made from non-harmful PCL materials.
Bring Your Kid's Drawings to Life!
myFirst 3dPen Make is designed to add joy to your child’s learning process. After all, drawing is the building block for learning new complex concepts. Journey with us as we build big minds together!
Safe to Touch
Safety first, folks! With the awesome myFirst 3dPen Make, you don't have to worry about little hands getting burnt because the heat stays on the inside.
Plus, the filaments are made from kid-friendly PCL materials, so they're totally safe to touch. Fun and worry-free creativity all the way!
Operate Wirelessly
myFirst 3dPen Make has a built-in battery and charges via USB, so no pesky wires to deal with while you kids are getting creative. Super convenient, right?
Rapid Solidification
Get this: myFirst 3dPen Make uses specially made low-heat filament that solidifies super fast! And the best part? The material is non-adhesive, so cleaning up is a breeze. Say goodbye to sticky messes and hello to hassle-free creativity!
More About PCL Filaments
Get ready to dive into a rainbow of creativity! You can easily find multi-colored filaments to bring your ideas to life. And guess what? The filaments are made of Polycaprolactone (PCL), a biodegradable polyester that's super easy to work with.
With a melting point of around 60°C, it's soft at room temperature, giving you endless possibilities for your projects!
Our 3D Pen starter kit lets kids aged 3 to 12 bring their drawings to life, exploring the magic of 3D creation.
Imagination Unleashed
Specially designed for young creators, this 3D Pen allows them to turn their ideas into three-dimensional masterpieces.
User-Friendly and Safe
With easy-to-use controls and a safe design, this 3D pen offers a creative outlet that's perfect for young minds, sparking their creativity and artistic skills.
Fun and Interactive
Watch as they craft and construct with ease, all while having a blast and learning in an interactive way.
Wireless Convenience
Features an inbuilt battery with USB charging, eliminating the need for wires, ensuring easy usage and movement.
Rapid Solidification
Utilizes low-heat filament for fast solidification, with non-adhesive material that is easy to clean off.
Safe to Touch
The device's heat doesn't transfer to the exterior, ensuring the child's safety. The filament is made from non-harmful PCL materials.
Bring Your Kid's Drawings to Life!
myFirst 3dPen Make is designed to add joy to your child’s learning process. After all, drawing is the building block for learning new complex concepts. Journey with us as we build big minds together!
Safe to Touch
Safety first, folks! With the awesome myFirst 3dPen Make, you don't have to worry about little hands getting burnt because the heat stays on the inside.
Plus, the filaments are made from kid-friendly PCL materials, so they're totally safe to touch. Fun and worry-free creativity all the way!
Operate Wirelessly
myFirst 3dPen Make has a built-in battery and charges via USB, so no pesky wires to deal with while you kids are getting creative. Super convenient, right?
Rapid Solidification
Get this: myFirst 3dPen Make uses specially made low-heat filament that solidifies super fast! And the best part? The material is non-adhesive, so cleaning up is a breeze. Say goodbye to sticky messes and hello to hassle-free creativity!
More About PCL Filaments
Get ready to dive into a rainbow of creativity! You can easily find multi-colored filaments to bring your ideas to life. And guess what? The filaments are made of Polycaprolactone (PCL), a biodegradable polyester that's super easy to work with.
With a melting point of around 60°C, it's soft at room temperature, giving you endless possibilities for your projects!
Producent
Varenummer
3482216
Model
FP3304SA-BE01
Ean
850031616257
Til producentens hjemmeside
Produktbeskrivelse
myFirst 3dPen Make - 3D-udskrivningspen
Printertype
3D-udskrivningspen - FDM/FFF
Model
Transportabel
Vægt
46 g
Understøttede byggematerialer
Polykaprolacton (PCL)
Printeregenskaber
Justerbar temperatur, justerbar støbehastighed, indre bygget genopladeligt batteri
Fås i farverne
Blå
Dimensioner (B x D x H)
14.2 cm x 2.9 cm x 2.6 cm
Generelt
Printertype
3D-udskrivningspen
Teknologi
Fused Deposition Modeling (FDM)/Fused Filament Fabrication (FFF)
Fås i farverne
Blå
Printer
Printeregenskaber
Justerbar temperatur, justerbar støbehastighed, indre bygget genopladeligt batteri
Mediebehandling
Understøttede byggematerialer
Polykaprolacton (PCL)
Dysediameter
0.9 mm
Filamentdiameter
1.75 mm
Diverse
Udstyr inkluderet
Skabeloner, 2 klistermærker, termoplastisk plade
Medfølgende ledninger
1 x opladerkabel til mikro-USB
Med forbrugsartikler
1 x PCL filament (Lys pink)
1 x PCL filament (sort)
1 x PCL filament (blå)
1 x PCL filament (lyseblå)
1 x PCL filament (gul)
1 x PCL filament (rød)
1 x PCL filament (lysegrøn)
1 x PCL filament (grøn)
1 x PCL filament (lilla)
1 x PCL filament (sort)
1 x PCL filament (blå)
1 x PCL filament (lyseblå)
1 x PCL filament (gul)
1 x PCL filament (rød)
1 x PCL filament (lysegrøn)
1 x PCL filament (grøn)
1 x PCL filament (lilla)
Effekt
Strømenhed
Strømforsyningsadapter (ikke inkluderet)
Mål og vægt
Bredde
14.2 cm
Dybde
2.9 cm
Højde
2.6 cm
Vægt
46 g
Ovenstående informationer/specifikationer kan løbende ændres. I tilfælde af trykfejl vedrørende pris eller udsolgte varer bestræber vi os på hurtigst muligt at opdatere siden. Hvis en pris er åbenlyst forkert, er Proshop ikke forpligtet til at levere det pågældende produkt til den forkerte pris. Enkelte tekster kan være autogenererede eller maskinoversatte, og der kan derfor fremkomme tekster, som virker misvisende.