Varenummer:
2207791
SATA300 TX2 Plus PCI Controller
Lagringskontrol, SATA-300/DMA/ATA-133 lav profil, 300 MBps, PCI / 66 MHz
Detaljer
Producent:
Promise
Varenummer:
2207791
Model:
F29S32P00MM0000
Ean:
704118015634
Kategori:
Controller
Links:
Til producentens hjemmeside:
Link til denne side:
http://www.proshop.dk/Controll
Produktbeskrivelse
|
Promise SATA300 TX2plus - lagringskontrol - ATA-133 / SATA-300 - PCI / 66 MHz
|
Enhedstype
|
Lagringskontrol - indstikskort - lav profil
|
Grænsefladetype
|
PCI / 66 MHz
|
Dimensioner (B x D x H)
|
11.9 cm x 5.7 cm
|
Controller-grænsefladetype
|
ATA-133 / Serial ATA-300
|
Dataoverførselshastighed
|
300 MBps
|
Understøttede enheder
|
Harddisk
|
Maks. antal lagerenheder
|
4
|
Systemkrav
|
Microsoft Windows 2000, Red Hat Linux, SuSe Linux, Microsoft Windows XP, Microsoft Windows Server 2003
|
Generelt
|
Enhedstype
|
Lagringskontrol - indstikskort - lav profil
|
Grænsefladetype
|
PCI / 66 MHz
|
Dybde
|
11.9 cm
|
Højde
|
5.7 cm
|
Controller for lagring
|
Controller-grænsefladetype
|
ATA-133 / Serial ATA-300
|
Dataoverførselshastighed
|
300 MBps
|
Understøttede enheder
|
Harddisk
|
Maks. antal lagerenheder
|
4
|
Ekspansion / Konnektivitet
|
Interface
|
2 x lager - Serial ATA-300 - 7- pin seriel ATA
1 x lager - ATA-133 - 40-PIN IDC
|
Kompatible åbninger
|
1 x PCI / 66 MHz - low-profile
|
Diverse
|
Medfølgende ledninger
|
2 x Seriel ATA kabel - intern - 65 cm
1 x IDE-kabel - intern - 45 cm
|
Overensstemmelsesstandarder
|
FCC Klasse B-certificeret, UL, VCCI, C-Tick, BSMI, cUL, MIC, RoHS
|
Medfølgende programmer / Systemkrav
|
OS nødvendig
|
Microsoft Windows 2000, Red Hat Linux, SuSe Linux, Microsoft Windows XP, Microsoft Windows Server 2003
|
Miljømæssige parametre
|
Min. driftstemperatur
|
0 °C
|
Maks. driftstemperatur
|
50 °C
|
Fugtighedsgrad ved brug
|
5 - 95%
|
The Promise SATA300 TX2plus 2+1 SATA/PATA PCI adapter offers the premier solution for combining the latest, high-performance SATA 3.0 Gb/s Serial ATA disk drives with existing Parallel (Ultra) ATA drives using the same controller. With the SATA300 TX2plus, users can connect up to two SATA drives and 2 PATA drives, offering users a cost-effective solution for upgrading their existing storage system with SATA 3Gb/s drives. While storage system performance is affected by components throughout the storage system, SATA drives with 3Gb/s can deliver significantly faster burst data throughput. Like a faster data cache, the faster burst rate when using the latest 3Gb/s drives should provide a snappier feel when opening small files and conducting the day-to-day tasks that many desktop and workstation PCs are required to perform. The controller supports Serial ATA 3Gb/s drives and conforms to Serial ATA II, Extensions to Serial ATA 1.0a specification - including Native Command Queuing and Disk Activity LED headers support. In addition to NCQ, the controller also supports Tagged Command Queuing with drives that can take advantage of this capability. Command Queuing increases I/O performance by intelligently reordering data requests so that the data can be more quickly accessed than if the commands weren't ordered. For support of legacy parallel ATA devices, the SATA300 TX2plus supports Ultra/ATA devices up to 133MB/sec data transfer rate. Drawing upon Promise's expertise in ATA, the controller incorporates performance-enhancing features such as CRC error checking and separate timing for two devices attached to one ATA channel. The SATA300 TX2plus also supports parallel ATAPI devices. The low-profile form factor SATA300 TX2plus PCI adapter incorporates many of Promise Technology's advanced host bus adapter features. The 66MHz PCI bus supports up to 266MB/sec burst data transfer rate. The SATA300 TX2plus also includes large LBA support for drives above 137GB, and its onboard BIOS automatically identifies and configures drive type (Serial ATA, Ultra DMA mode). The controller supports up to two controllers in the same system.
Ovenstående informationer/specifikationer er vejledende og kan
uden varsel være ændret af producenten.
Der tages forbehold for trykfejl og vejledende billeder.